In the span of just one year, you have probably used your kitchen faucet more than 100 times! That’s an incredible amount of use for any product, let alone something that must be turned on and off every single day. The good news is that it can be replaced with relative ease if you follow the instructions below.
Introduction to Pfister Kitchen Faucets
Pfister is a leading manufacturer of high-quality kitchen faucets. They are well known for their innovative design and superb functionality. They come in a wide range of styles and finishes to suit any décor. Pfister produces faucets for all price levels, from the high-end designer lines down to cost-effective models for those on a budget.
Single handle pullout sprayer with side spray or deck mount installation – the most common type of kitchen sink and one that you probably already have at home. It is easy to use and offers good control over water temperature as well as pressure. The single lever can be pushed forward towards the ‘on’ position for hot water; pulled back towards the ‘off’ position for cold water.
There are several kinds of Price Pfister Kitchen Faucets that fit this description; however, most require some degree of disassembly before installation is possible due to their size or shape (or any other reason). Some will come apart easily while others may be very difficult to take apart without special tools or experience working on plumbing systems.
Kitchen Sink Single Handle Pull Out Sprayer – Some designs have one-piece base plates making it impossible for you to access the screw and take it out.
Single Handle Kitchen Faucet – To fill in this gap, we’ve put together a comprehensive guide on how to remove Price Pfister single-handle kitchen faucets regardless of your skill level or whether you have any prior plumbing experience. By following our step-by-step instructions, you should be able to successfully complete the job with relative ease and minimal headache (and hopefully no scalding water burns).
What You’ll Need
There are a few things you’ll need to remove a Price Pfister single-handle kitchen faucet.
Then go ahead and lay down towels or a wet rag under it so that any excess water dripping from the spout can be soaked up instead of making puddles all over your countertops. And if there’s still some residual drip after removing everything then turn on both hot and cold valves at once to flush out much of the remaining water before putting in new washers.
First, you will need the following tools: adjustable wrench and basin wrench (also called an “S-wrench” or “water pump pliers”). These will help ensure proper leverage as well as protect from marring of components during the removal process – something unnecessary due to the high-quality material construction of this popular brand name product line.
Next, you will need the following parts: a Price Pfister faucet replacement cartridge and new mounting nuts.
Finally, you may want to purchase some sealant or silicone grease at your local hardware store as well as an old towel for padding.
Instructions to Removing and Reinstalling a Price Pfister Single Handle Kitchen Faucet
When you have a single-handle kitchen faucet, there are two ways to remove it: by turning off the water supply and draining out all of the remaining water in the system, or simply turning on your cold side to drain out most of the water through internal workings. You can use an adjustable wrench for this task; if not available any small size crescent wrench will do fine.
A Pfister single-handle kitchen faucet will have a lock nut at the bottom of it that holds everything in place. Once you get rid of coupling nuts, lift up a single-handle kitchen faucet and turn to remove it from the countertop hole. Be careful while doing this because if your sink is not empty there might be some residual water that can spill out over the sides.
To reinstall the new fixture, take hold of the old rubber washer with pliers and slide it into proper position inside the base plate/body before placing back down onto the countertop surface (final step).
Now take hold threaded end part house where the previous fixture had been attached by holding it upside down so threads are pointing towards the ceiling; now align to wall behind cabinet door opening followed by inserting stem through the base plate and tighten locking nut onto stem by hand.
Make sure everything fits back in tight and secure while not stripping any threading before applying a bit of Teflon tape clockwise, inserting a washerless cartridge into the top of the body followed by the threaded end part house with a rubber washer at the bottom (factory preset lock nut will be on this piece).
Finally, open up the main shutoff valve followed by hot/cold lines under the sink if not already done so in previous steps. Once that is done you can take your new single handle kitchen faucet and sprayer assembly out of the box.
Now you need to test all valves making sure everything works properly before placing them back into the cabinet door opening.
With these few simple tips, removing a Price Pfister faucet should be no big deal especially since it’s just one piece without any additional attachments or components involved.
Reminders for Maintenance
- Make sure you have all the tools required to do this job. You may not need all of them, but it’s good to have them just in case.
- Turn off the water supply at your home’s main shutoff valve before starting this project. This will prevent injury and unnecessary damage to things around the kitchen area like cabinets or floors if you accidentally drop something down the open drain holes on either side of your sink (which is located under where your faucet was).
- If possible, place some towels over any exposed cabinet surfaces near the sink so that nothing gets damaged by stray tools dropped during installation.
- You can also use a small piece of rope tied into a large knot for each end with suction cups attached to hang up anything metallic while working underneath sinks – such as wrench sets, pliers, and Allen wrenches.
- If there was already an old Price Pfister single-handle kitchen faucet attached before then it will most likely be best to remove all remaining pieces carefully by unscrewing them using pliers first (before trying to lift out each section). It’s possible some parts could become broken once removed so try not to apply too much force when taking them apart.
- On your first attempt, it is best if you don’t try to take apart something that should not be taken apart. You can damage other parts in the process of taking off a Price Pfister single-handle kitchen faucet and hence create more problems than what was originally there.
- If you are unsure, consult an expert before attempting any repairs yourself!
How do you remove the cartridge from a faucet?
A cartridge is a removable piece that contains the valve mechanism for faucet handles and valves. To remove one, you’ll need to take off the handle(s) first so they don’t get in your way when you’re working on removing it. Don’t forget this step! Once removed, use a cartridge puller to remove the old one. If you don’t have a cartridge puller, you can try using pliers instead but it may scratch up your faucet if you’re not careful!
Once the cartridge is out, you can install a new one by lining it up with your faucet and sliding it into place. Be careful not to turn on the water yet since there may still be some residual pressure in the lines!
After that, just reattach everything back together, turn on both hot and cold valves at once so the cartridge can fill with water, and test it out!
Problem: I just installed my new pull-out faucet and have low flow
Solution: If you have a pull-out faucet, make sure that your hose is fully extended before turning on the water, or else you may not get full strength in both hot and cold. Many people don’t think to do this step when installing their new kitchen sink but it’s a really important one to remember!
Problem: Flow is still low after flushing the hose and aerator
Solution: If you have an aerator, remove it by turning counter-clockwise. You should see some tiny holes in the screen that may be clogged with sediment or debris. Clean out those bits and pieces to get your water flow back! Pro Tip: Be careful not to drop any parts down the drain when removing them so you don’t have to fish them out.
Useful Video: Price Pfister Single Handle Kitchen Faucet Cartridge Access Marielle Series 26
As you can see, removing a Price Pfister single-handle kitchen faucet is not difficult. But if you are still unsure about whether or not to replace it yourself, have the work done by a professional plumber.
You should never try to do any repairs yourself if you are not sure of what you are doing. If the work is done incorrectly, it can lead to major problems in your kitchen down the road. This will cost more money than just paying a professional plumber for their services up-front. Plus, they have all of the right tools and equipment that you might need when removing this type of faucet from your sink.
Lastly, remember to shut off both hot and cold water supplies before beginning any work on either one! You don’t want to cause additional damage by adding pressure or heat to an already broken system inside your home because these could create leaks that would be very expensive to repair later on!
We hope this guide has been helpful in showing you how to remove a Price Pfister single-handle kitchen faucet. This is just one way that homeowners can save some money by doing the work themselves without calling in professional plumbers for everything under the sun!
Thanks again for stopping by our blog today; it means a lot to us that you took time out of your day (that may have already been jam-packed full of activities) just to educate yourself on how easy it can be to do some DIY projects around the home!
Good luck with your project!