How to Hide Kitchen Vent Pipe?

How to Hide Kitchen Vent Pipe?

The kitchen vent pipe is a device that makes it easier to remove cooking vapors, odors, and smoke from the air. It works by drawing the air out of your kitchen, creating negative pressure. It is usually attached to an exterior wall using screws or brackets.

Why should you hide it? You may want to hide your kitchen vent because it is the least attractive part of any kitchen design and usually stands out like a sore thumb against most interior walls! That’s why interior designers created these fabulous ideas to help you with hiding this unsightly piece!

Use Soffits or Columns

This is the most ideal option for hiding kitchen vent pipes. Soffits are usually dropped down from your ceiling, often in a cabinet or along an existing wall where you have already installed cabinets.

Here is what you can do:

  • Measure and cut appropriate sized PVC pipe to fit inside of soffit with hacksaw/saw/or another tool until it fits perfectly snug within the space provided by the new appliance – leaving just enough room between each piece for airflow purposes if that’s what you’re looking for;
  • Keep this in mind when measuring out lengths as well since these pieces will need to properly slot into place once they are secured at their desired height above ground level (that means no wacky measurements like 47 feet long) unless of course, this is something you’re looking for;
  • Secure pieces together with PVC cement and solvent glue (use directions on can) or use a primer first if using ABS plastic pipes. Make sure there are no leaks by checking all connections thoroughly! If so, keep applying more of either glue until dry before running water through the finished project – otherwise, you might end up having to start all over again;

Install False Cabinets

It is another great way to hide the ugly kitchen vent pipe – install false cabinets for decorative purposes only. You may do it this way:

  • Measure out an appropriately sized piece of plywood to fit inside the space where you will be installing a new cabinet. Mark and cut with a jigsaw/saw until it fits perfectly into place! Remember that these pieces may need some extra sanding or finishing work once installed for a smooth finish;
  • Once edges have been smoothed down using sandpaper (or another fine grit abrasive tool), paint black from top to bottom in order to make all piping completely camouflaged within your kitchen design. You can even add decorative knobs on each door if desired as well since most false cabinets look just like the real thing;
  • Install as you would a normal cabinet and fill with the necessary items that will fit into each space;
  • You can even buy decorative knobs for these false cabinets if desired – just make sure they coordinate well within your kitchen design scheme since this will help camouflage any piping behind them once installed on top/bottom or either side door panel;

Paints to Cover the Kitchen Vent Pipe

Paint can be used to cover up a vent pipe, but you need the right type of paint.

Use an oil-based primer and an eggshell finish on your base coat if it’s metal, or use latex paint with high hiding power. Just remember that any moisture will cause rusting again so don’t try this unless there won’t be moisture anywhere around the pipes or in the cabinet where they’re located for at least 24 hours after painting them! Make sure to clean thoroughly before applying 2 coats of primer and then one topcoat color-matched to your wall color (or not).

A faux finish such as glaze effects is another good way to hide the kitchen vent pipe if you have time since it looks nice too without having to be painted. If you go this route, start with a flat latex paint and mix in glaze medium to make it look like oil-based enamel or gel stain – whatever looks best for your home’s decor.

Other Things and Accessories to Hide Your Vent Pipe in the Kitchen

  • Wooden shelf. Wood is a natural material that can be painted or stained to match the decor. For example, an unfinished shelf with matching brackets would go well in a country kitchen and blend into the woodwork of the room. Unfinished shelves are easy to install; all you need is some basic tools, such as a drill and screws;
  • Wallpaper. If you want to go in the opposite direction and add more decoration, wallpaper can be a great option for hiding vent pipes. You do not need to worry about matching existing decor; instead, pick something completely different but complementary. For example, you could use an Asian inspired dragon print or a green and yellow garden scene;
  • Decorative cover. Another option is to find decorative covers that can be placed over the vent pipe itself. These are often made from metal, such as copper or nickel, so they will match well with your kitchen decor but also blend in nicely if you do not have matching hardware elsewhere on cupboard doors or drawers;
  • Magnetic knife holder. If you want to go even further and completely decorate your kitchen, try using a magnetic knife holder to cover up the vent pipe on any wall that isn’t used for cooking. You can buy these in many styles; be sure to choose one that matches the rest of your décor if you do not want to draw attention away from your cooking area;
  • Plate rack. If you have an open vent in the corner of the ceiling, use it! Turn this into storage for plates or anything else that can be hung with pegs on a plate rack. This is especially useful if you are lacking space elsewhere; all you need to do is drill a couple of holes in the ceiling and install a plate rack;
  • Curtains. If you have an open vent, try using curtains around it so that it looks like part of your windows. This will blend everything together nicely without drawing too much attention away from cooking or any other activities going on in the room. In addition, it’s a quick and easy way to create more space in your kitchen if you have a small one;
  • Artificial plants. If there is not an open vent near the ceiling or other wall where you can hang things, try using artificial plants as décor instead of art pieces so that they serve both purposes at the same time. This way, you can place a couple of plants around the vent pipe and cover it up without making your kitchen look cluttered or messy;
  • String lights. Another option is to use string lights instead of individual lamps in order to provide light for both cooking and atmosphere at the same time. For example, there are solar string lights that could be placed right on the ceiling and plugged into an outlet. This will provide you with both light for cooking as well as nice mood lighting to set the tone of your kitchen during dinner parties or other social gatherings;

Issues With Bulkhead

Bulkheads are not attractive to look at. They ruin the aesthetics of your kitchen and might even require you to change design plans if they can’t be worked around or removed completely:

  • The pipes often show through bulkhead doors, which can make them hard to open and close. Bulkheads take up valuable space in an already crowded kitchen and make it more difficult to store items;
  • The bulkhead wall can become loose from the ceiling over time, which could lead to pipes disconnecting or falling out of place entirely;
  • There is a very high chance that you will not be able to find replacement parts for your vents because they are so old;
  • If the vent is in a corner of your kitchen, you will lose significant counter space;
  • You may have to make additional renovations or repairs when it’s time for maintenance on your vents;

Comparison of Methods to Hide Kitchen Vent Pipe

This table provides a comparison of various methods to hide a kitchen vent pipe. The vent pipe plays an essential role in removing smoke, odors, and gases generated during cooking. However, it can be unsightly and disrupt the aesthetics of the kitchen. By utilizing different techniques, homeowners can effectively conceal the vent pipe while maintaining a visually appealing kitchen space. The table below highlights key indicators and measurements associated with each method.


  • Method: Describes the technique used to hide the kitchen vent pipe.
  • Ease of Installation (1-5): Rates the level of difficulty in installing the method, with 1 being the easiest and 5 being the most challenging.
  • Cost (in USD): Represents the approximate cost of implementing the method, including materials and labor.
  • Space Occupied (in inches): Indicates the amount of additional space required to accommodate the concealed vent pipe.
  • Aesthetics (1-5): Rates the visual appeal and seamless integration of the hidden vent pipe within the kitchen decor, with 1 being the least appealing and 5 being highly attractive.
  • Effectiveness (1-5): Reflects the efficiency of the method in concealing the vent pipe and preventing any visual or functional disruptions, with 1 being the least effective and 5 being highly effective.
Method Ease of Installation (1-5) Cost (in USD) Space Occupied (in inches) Aesthetics (1-5) Effectiveness (1-5)
Behind Cabinetry 3 500-1000 4-8 4 5
In False Ceiling 4 800-1500 8-12 5 4
Inside Duct Chase 5 1500-2500 12-16 3 4
Under Cabinet 2 300-600 0-4 4 3

In this table, four different methods for hiding kitchen vent pipes are compared based on various indicators. The methods include “Behind Cabinetry,” “In False Ceiling,” “Inside Duct Chase,” and “Under Cabinet.” The indicators evaluated are ease of installation, cost, space occupied, aesthetics, and effectiveness. Each method is assigned a rating on a scale of 1 to 5 for each indicator, allowing homeowners to make an informed decision based on their preferences and requirements.


Is it ok to cover air vents?

Air vents may need a cover to prevent the spread of insects and odors. However, it is not safe to completely block air from entering your home because doing so can cause the accumulation of dust particles. It can also lead to stale air, which causes health problems such as respiratory diseases and allergic reactions. Consult a specialist before making or buying a cover for your kitchen vent pipe.

Can you cover the vent in your room?

Yes, you can. You could use a basic cap but make sure it is made of metal, not plastic. If the vent pipe goes through your roof or wall insulation, this will help to reduce noise coming from the kitchen into other parts of your house.

You could also attach some plywood around it if needed for aesthetic purposes – just remember that ventilation is key! Don’t cover up more than three sides with anything else as you need airflow. It’s important because carbon monoxide emits are dangerous and can lead to death so keep an open mind about what would work best in your home situation.

Which pipe is best for a chimney?

A chimney pipe is a metal or plastic tube. The advantage of using the metal one over the plastic version is that it can withstand heat better without cracking and becoming damaged. This type of venting system uses an outside wall to expel smoke from your fireplace, so you have to be careful not to block any windows or doors with installation.

A kitchen’s ventilation fan draws odors out through the ductwork in order to keep smells down during cooking. It also helps reduce moisture levels throughout your home by drawing moist air away and forcing it into the atmosphere outside where it quickly dissipates along with other particles like dust and pollen as well as pet dander that can trigger asthma attacks for those who are sensitive to these allergens.

Some professionals are not opposed to using PVC pipe for venting, but you have to be careful about how long it is so that the moisture does not condense and start forming mold within the walls. This can cause all kinds of issues down the road including respiratory problems in addition to being aesthetically unpleasing.

Higher-end manufacturers often use stainless steel vents because they do a good job at keeping flavor inside your home instead of allowing it into other parts of the house via transfer through any penetrations or connections outside.

How can I hide a kitchen vent pipe?

To hide a kitchen vent pipe, you can consider the following options:

  • 1. Concealment within cabinets: One common method is to conceal the vent pipe within a kitchen cabinet. This involves creating a dedicated space or enclosure within the cabinet to accommodate the pipe. Make sure to leave sufficient clearance around the pipe to ensure proper ventilation.
  • 2. Built-in soffit or bulkhead: Another option is to build a soffit or bulkhead around the vent pipe. This involves constructing a lowered or dropped ceiling area above the cabinets, extending from the wall to the ceiling. The vent pipe can be hidden within this structure, offering a seamless integration with the kitchen design.
  • 3. False beam or decorative column: If you have a kitchen island or an open concept kitchen, you can consider incorporating a false beam or decorative column to hide the vent pipe. These design elements can be installed strategically to conceal the pipe while adding an aesthetic touch to the overall kitchen design.
  • 4. Drywall or plaster cover-up: In certain cases, you can hide the vent pipe by covering it with drywall or plaster. This technique involves creating a chase or channel in the wall or ceiling where the pipe runs and then covering it up with the appropriate material. It is essential to ensure proper access to the pipe for maintenance purposes.

What factors should I consider when hiding a kitchen vent pipe?

When hiding a kitchen vent pipe, it’s crucial to consider the following factors:

  • 1. Building codes and regulations: Ensure that you comply with local building codes and regulations when modifying or concealing a vent pipe. Some areas may have specific requirements regarding pipe materials, clearances, and access points.
  • 2. Ventilation efficiency: Concealing the vent pipe should not compromise the efficiency of the kitchen ventilation system. It’s important to maintain proper airflow and ensure that the concealed pipe allows for the effective removal of cooking odors, smoke, and excess heat.
  • 3. Access for maintenance: Although the goal is to hide the vent pipe, it’s essential to provide access for maintenance and cleaning purposes. Consider incorporating removable panels or access points in the concealed design to facilitate any necessary repairs or inspections.
  • 4. Integration with kitchen design: The method chosen to hide the vent pipe should seamlessly integrate with the overall kitchen design. Consider the aesthetics, materials, and finishes that will complement your kitchen style and ensure a cohesive look.

Do I need professional help to hide a kitchen vent pipe?

While it is possible to hide a kitchen vent pipe as a DIY project, seeking professional help is recommended, especially if you are not experienced in construction or kitchen remodeling. A professional contractor or kitchen designer can provide expertise in designing and executing the concealment process while adhering to building codes and ensuring optimal ventilation efficiency. They can also help you choose the most suitable method and materials based on your specific kitchen layout and requirements.

Can I reroute a kitchen vent pipe to hide it?

Rerouting a kitchen vent pipe to hide it is possible, but it can be a complex task that may require professional assistance. Here are some considerations:

  • 1. Structural feasibility: Determine if it’s feasible to reroute the vent pipe without compromising the structural integrity of your home. The pipe needs to maintain proper slope, avoid sharp bends, and have sufficient clearance from other obstacles.
  • 2. Building codes and permits: Check local building codes and regulations to ensure compliance when rerouting a vent pipe. Depending on the extent of the modification, you may need permits or inspections to ensure safety and functionality.
  • 3. Plumbing and electrical considerations: Rerouting a vent pipe may require adjustments to the plumbing system, including reconnecting to the main vent stack. Additionally, you should be cautious about any nearby electrical wiring or fixtures that could be affected by the new pipe route.
  • 4. Professional expertise: Given the complexity of rerouting a vent pipe, it’s advisable to consult with a professional plumber or contractor. They can assess the feasibility of the project, provide expert guidance, and ensure that the rerouted pipe meets all necessary requirements.

Are there alternative methods to camouflage a kitchen vent pipe?

Apart from hiding a kitchen vent pipe through concealment, there are alternative methods to camouflage it. Here are a few ideas:

  • 1. Decorative pipe covers: You can find decorative pipe covers specifically designed to conceal kitchen vent pipes. These covers come in various materials, such as wood, metal, or PVC, and can be customized to match your kitchen’s style. They provide an attractive cover for the pipe while adding a decorative element to your kitchen.
  • 2. Customized kitchen hoods: Instead of hiding the vent pipe, consider investing in a customized kitchen hood. These hoods come in different designs and finishes, allowing you to integrate the vent pipe as part of the overall hood structure. This method turns the pipe into a prominent design feature rather than trying to conceal it.
  • 3. Decorative painting or camouflage techniques: If the vent pipe is exposed, you can employ creative painting techniques to make it blend with the surrounding walls or ceiling. For example, using the same color or pattern as the adjacent surface can help camouflage the pipe and make it less noticeable.

What are the safety considerations when hiding a kitchen vent pipe?

When hiding a kitchen vent pipe, it’s crucial to prioritize safety. Consider the following safety considerations:

  • 1. Fire safety: Ensure that any materials used to conceal the vent pipe are fire-resistant or have the appropriate fire ratings. This is particularly important when hiding the pipe within cabinets or bulkheads near cooking appliances.
  • 2. Adequate ventilation: Verify that the concealed vent pipe allows for proper airflow and ventilation. Inadequate ventilation can lead to the buildup of harmful gases, such as carbon monoxide, or create excessive heat accumulation in the kitchen.
  • 3. Avoiding structural damage: Be cautious when cutting into walls or ceilings to create chases for the pipe. Take care to avoid damaging structural elements, electrical wiring, or plumbing lines that may be hidden within the walls or ceiling.
  • 4. Compliance with building codes: Ensure that the concealed vent pipe meets all local building codes and regulations. These codes often dictate the materials, clearances, and access requirements for ventilation systems to ensure safety and functionality.

Useful Video: Boxing in a Hood Fan Exhaust Duct