# How to Calculate Linear Feet for Kitchen Cabinets?

Kitchen cabinets are a staple in most homes. They provide storage for dishes, pots and pans, and other kitchen items. When it comes time to remodel your kitchen, you will need to know how to calculate linear feet for kitchen cabinets. This is not a difficult task, but it can be confusing if you have never done it before. This article will walk you through the process of calculating linear feet for kitchen cabinets. It will also provide you with a few tips that will make the process easier!

## What Is Linear Foot Measuring?

Linear foot measuring is a system used to measure length, which is the distance between two points. It can also be used as a unit of measurement for various tasks such as carpentry and construction work. This type of measuring is usually done with a ruler or tape measure, but it can also be calculated using a mathematical formula. Linear feet are usually abbreviated as “ft” or “FT.”

One linear foot is equal to 12 inches or 0.3048 meters in length. When measuring using linear feet, the starting point and end point are marked off in inches and then multiplied by 12 to get the final number of linear feet in the measurement.

For example, if you measured 10 feet from one point to another, you would multiply 10 by 12 to get 120 linear feet. Linear foot measuring is often used in construction projects and home improvement projects as well as for various other measurements. It can also be used for calculating the square footage of an area or the cubic footage of a space.

When using linear feet, it is important to remember that it is only accurate when measuring the same points on either side of the measurement. If you measure from two different points, then your result may not be accurate. Additionally, if you are measuring along a curved line, it is best to break up the measurement into small sections and then add them together at the end to ensure accuracy.

In conclusion, linear foot measuring is a system used to measure the length and is often used for various tasks such as carpentry, construction work, and home improvement projects. It is important to remember that it is only accurate when measuring the same points on either side of the measurement, and that curved lines should be broken up into smaller sections before adding them together. With proper use of linear foot measuring, you can ensure that your measurements are accurate [1].

## Some Things to Consider When Calculating Linear Feet for Kitchen Cabinets

### Cabinet sizes

The size of the cabinets you choose for your kitchen will determine how many linear feet you need. For a standard-size kitchen, you should plan to use between 24 and 36 inches for each base cabinet, 18 to 24 inches for wall cabinets, and 12 to 15 inches for upper cabinets.

### Cabinet depth

The depth of the cabinets is just as important as the width when it comes to linear feet. The average depth of most base cabinets is 24 inches deep; however, some brands offer deeper models that can be up to 28 or 30 inches deep. Wall cabinets are usually 12 inches deep, while upper units can be anywhere from 6-15 inches in depth.

### Layout considerations

When planning a kitchen layout, remember to account for appliances and other obstructions when calculating linear feet. You may need to adjust the design slightly to accommodate any obstacles that could interfere with cabinet installation.

### Reverse engineer the process

If you already have kitchen cabinets installed, you can use the reverse engineering method to calculate linear feet. Simply measure the length of all cabinet sections and multiply that by the number of cabinets in each run to get your total linear footage.

### Appliances

It’s important to consider any appliances you may want to install along with your cabinets when calculating linear feet. Built-in refrigerators and ovens require additional space that should be accounted for in your calculation [2].

### Finishing touches

Finally, don’t forget to factor in any finishing touches such as crown molding or decorative accents that you may want to add to the kitchen cabinet system. These extras can add extra length depending on how elaborate they are. Calculate the needed linear footage for these additions to ensure that you have enough material for the entire project.

## What Tools Do You Need to Measure Linear Feet?

The tools you need to measure linear feet depend on the specific application. Generally, a tape measure is needed for short distances, while a ruler or yardstick can be used for larger measurements. A steel measuring tape is more accurate than other types of tape such as cloth or plastic tape. Additionally, laser measurement devices are available for longer and more precise distances.

Depending on your project and accuracy requirements, it may also be necessary to use an angle finder tool to accurately measure angles and corners. If you need to measure large areas or irregular shapes, using a wheeled-measurement device will make the job easier. As with any type of measuring task, always ensure that you have the right tools for the job before beginning any work.

Remember, accuracy is key when measuring linear feet. Make sure to double-check all measurements and take into account any imperfections or differences in the surface that could affect the final result. Measuring linear feet can be time-consuming, so always plan and take your time to ensure accurate results [3].

## How Do You Measure Linear Feet for Kitchen Cabinets?

### Step 1: Measure the Walls

The first step to measuring linear feet for kitchen cabinets is to measure the walls where the cabinets will be going. This measurement should take into account any obstacles or features that may interfere with your cabinet installation. Be sure to use a tape measure rather than relying on estimations.

### Step 2: Draw a Sketch

Once you’ve taken your measurements, sketch the wall that includes all obstacles and features. Label each measurement as well to ensure accuracy in calculating linear footage. Additionally, you’ll want to include any measurements for the space between cabinets which will be accounted for in your total linear footage.

### Step 3: Measure Along the Wall

Now that you’ve drawn your sketch, it’s time to measure along the wall. Measure the length of each section of the cabinet and add it up to get your total linear footage. This should include all cabinets and any space between them.

### Step 4: Measure Additional Walls

If there are additional walls involved in the kitchen cabinet installation, repeat steps 1-3 for each wall. This process should be repeated until you’ve measured all walls and have an accurate linear footage measurement.

### Step 5: Subtract the Allowances

Before you can finalize your linear feet measurement, you must subtract the allowances from it. These allowances include any space between the cabinets and any space needed for a dishwasher or other appliance installation. Once these allowances have been subtracted, your total linear footage should be accurate.

### Step 6: Appliance Allowance

If you’re installing kitchen cabinets with an appliance, add in the additional allowance for that appliance. This may vary based on the type of appliance and size but should be included in your total linear footage measurement.

### Step 7: Calculate Linear Foot

To calculate the linear foot measurement of your kitchen cabinet installation, you must add up all of the measurements taken along each wall. If there is more than one wall involved in the installation, each measurement should be added together to get a total linear footage figure. Once you’ve done this, subtract any allowances and appliance allowances to get your final linear footage calculation [4].

## How Many Cabinets Should a Kitchen Have?

The number of cabinets you need for your kitchen depends on the size and layout of your space, as well as the items that you plan to store in them. Generally speaking, a typical kitchen will have at least three uppers and three lower cabinets. If you’re short on wall space or don’t want to build too many separate pieces of cabinetry, you may opt for taller cabinets that reach up to the ceiling. For larger kitchens, five to six sets of both upper and lower cabinets are a good rule of thumb.

No matter the size of your kitchen, make sure to measure the space before making a purchase. This will ensure that all of your cabinets fit properly and look cohesive when installed. And don’t forget – proper cabinet installation is critical for both functionality and safety, so it’s best to leave this job up to professionals! With these tips in mind, you should be well on your way toward creating an efficient and stylish kitchen cabinetry set-up.

## Three Best Designs of Kitchen Cabinets:

1. Frameless cabinets: These are a classic option for kitchen cabinetry and they offer plenty of storage with a modern look. The minimalist design works well in any kitchen and these cabinets can be customized to fit any space. They are also easy to clean since there are no frames that collect dust or dirt;
2. Glass-fronted cabinets: If you want to add some style and sophistication to your kitchen, glass-fronted cabinets are a perfect choice. Not only do they look stylish and sleek, but they also provide an easier way to see all the items stored within them. Plus, you can use colorful glass inserts for extra character and flair;
3. Open shelving: While not technically a cabinet, open shelving can be a good option if you want to show off your favorite dishes and accessories. They also provide easy access to frequently used items and require less maintenance than traditional cabinets. However, they may not be the best choice for those with messy kitchens or who don’t have time to keep things neat;

No matter which design you choose for your kitchen cabinets, make sure to measure the space carefully and consider any special needs you may have before making a purchase. This will help ensure that your new cabinetry looks great and works perfectly in your home. With these tips, you’ll find the perfect kitchen cabinets to suit your style and lifestyle!

## FAQ

### How do you figure linear feet for cabinets?

Linear feet for cabinets can be calculated by measuring the total length of all the cabinet pieces that are being used. This includes the side panels, back panels, shelves, and drawers. Measure each piece individually and then add them all up to get the linear feet for your cabinets. It is important to note that if you have corner units or angled pieces, then you will need to measure from corner to corner to get an accurate measurement of linear feet. For example, a 3-foot wall cabinet would be calculated as 3 linear feet even though it might only span 2 feet on either side when connected to other cabinets.

### What type of material should I use for my kitchen cabinets?

The most common materials used for kitchen cabinets are particle board, plywood, and MDF (medium-density fiberboard). The best material to use will depend on your budget as well as the style of kitchen you are trying to achieve. Particleboard is the least expensive option but it can easily be damaged with moisture or heat. Plywood is more durable than particleboard and is preferred in many kitchens due to its ability to withstand moisture and heat. Finally, MDF is the most durable option but also the most expensive. It is ideal for high-end kitchens that require a lot of durability and stability.

### What type of hardware should I use for my cabinets?

When it comes to choosing hardware for your cabinets, there are several options available. Knobs and pulls are the most common type of cabinet hardware. Generally, knobs are used on smaller doors while pulls are used on larger doors. There are also a variety of finishes to choose from such as stainless steel, brass, nickel, bronze, and more. Additionally, many cabinets come with pre-installed hinges which can be adjusted to fit the look you desire. When selecting cabinet hardware it is important to consider the style of your kitchen as well as the materials being used for your cabinets.

### How many linear feet are in a 10×10 kitchen?

A 10×10 kitchen typically consists of 20 linear feet of cabinets. This includes the side panels, back panels, shelves, drawers, and any corner units or angled pieces. These measurements can vary based on the size and style of cabinets being used. When measuring for a 10×10 kitchen it is important to account for all the individual pieces that will be included in the design.

### Can I repaint my cabinets?

Yes, you can repaint your cabinets as long as you prepare them correctly beforehand. Start by cleaning and sanding the surfaces to remove any dirt or grease build-up. Then apply a primer to help ensure an even coat and finally paint with a high-quality spray paint or brush paint finish. If you do not feel comfortable repainting your cabinets yourself, you can always hire a professional to do the job for you. Be sure to check with your local hardware store for more details on the best paints and supplies to use when repainting your cabinets.

### How do you calculate linear feet for kitchen countertops?

Linear feet for kitchen countertops are calculated by measuring the total length of all the pieces that will be used. This includes countertop pieces, backsplashes, edge treatments, and any corner pieces or angled cuts. Measure each piece individually and then add them up to get the linear feet for your countertops. If you are using a seamless continuous material such as a granite slab, then you would measure the width of your space and multiply it by 12 (the standard depth of a kitchen countertop) to get your linear feet measurement.

### How many linear feet is a common kitchen?

The average kitchen is typically around 40 linear feet. This includes the total length of all the cabinets, drawers, countertops, and any other pieces that are used in the design. However, this can vary based on the size and style of the kitchen being built. For example, a larger kitchen with more intricate designs may require more linear feet than a simpler design. Be sure to measure accurately before building or purchasing materials for your kitchen to ensure you have enough material for the project.

## Conclusion

Calculating linear feet for kitchen cabinets is an important first step in remodeling a kitchen. By taking proper measurements and considering the main elements of your kitchen such as walls, windows, appliances, and other features, you can easily determine the total amount of linear feet needed to complete your project. Additionally, understanding how many cabinets are required for your specific size space can help you budget and plan the materials necessary for a successful installation. With careful planning and careful calculation of linear feet for kitchen cabinets, any homeowner can take advantage of all the benefits that come with a successful remodel. Overall, calculating linear feet for kitchen cabinets requires some basic knowledge but is relatively simple when you know what to measure and consider.

References:

1. https://www.forbes.com/home-improvement/contractor/what-is-linear-foot/
2. https://www.livingletterhome.com/how-to-calculate-linear-feet-for-kitchen-cabinets/
3. https://www.solutionsstores.com/how-to-calculate-your-home-s-linear-footage
4. https://www.hunker.com/13402682/how-to-measure-linear-foot-for-cabinets